Solo Roll-out Kit - Cabinet floor mounted. Two Tier, 3" high single drawer. For 10" to 36" wide openings.

  • $ 142.00
  • 1 review

Important: Enter cabinet opening width minus any hardware/door protruding into opening. A 1/2" will subtracted from your dimension to assure clear path for roll-out.

Solo Roll-outs Two Tier are to be mounted to cabinet deck.

Kits come fully assembled and require fastening to cabinet deck or shelf with 10 screws (included). Install should take 5-10 minutes per kit.

Kit includes:

  • 1 Roll-out drawer, standard 21" depth.
  • 1 pair of Soft close under mount slides.
  • 3/8" Base panel thickness.
  • Qty. 10 -  1 1/4" truss head screws.
  • Note: Unit width will be 1/2" more than drawer width allowing for door bumpers each side. Unit depth will be 3/4" more than drawer depth.

Standard Features:

  • Soft Close hidden under mount drawer slides with #100 rating.
  • Custom sized to fit your cabinets.
  • Door Bumper and drawer slide hardware attached to drawer.
  • Dovetail joint construction.
  • Assembled 5/8” thick birch plywood (11 ply) drawer sides.
  • Durable UV clear coat finish.
  • ¼” White melamine bottom finish.
  • Additional center support rail for drawers over 30” wide.
  • Max width of upper drawer is 12". Please note width of top tray and height off cabinet floor in remarks at check out.
  • Optional Drawer depths for under mount slides are available in 15", 18". Please note optional drawer depth in remarks at check out, no cost change for optional depth.
  • Height Clearance: 3" Dwr. = 3 3/4", 6" Dwr. = 6 3/4", 8" Dwr. 8 3/4".
  • Depth Clearance: Standard - 21 3/4", Optional depths -15 3/4", 18 3/4"
Measure and Installation Notes:
  • For Width dimension entry, be sure to enter opening width minus any hardware or cabinet door protruding into opening space. We will subtract an additional 1/2" for proper clearance. Fell free to contact us for any further questions or assistance. 

We Also Recommend